RouterOS 7.25beta4 [development] released

What's new in 7.25beta4 (2026-09-10):

*) app – allow the privileged mode to be enabled per service in the container app YAML;
*) bgp – improve stability;
*) bridge – improve FDB synchronization between MLAG peers when VLANs are added;
*) bth – fix file share issues when enabled through WinBox files menu;
*) certificate – refactor certificate internal processes (additional changes);
*) certificate – remove "GoDaddy Class 2 CA" from built-in root certificate authorities store;
*) console – improve stability;
*) crypto – improve stability;
*) dhcp – improve stability;
*) dhcpv4-client – ignore forcerenew packets that are not unicasted to client;
*) dns – fix resolving domain names that end with a dot;
*) iot – add a GPIO menu in WinBox;
*) ipsec – fix duplicate connections on IKEv2 retransmissions;
*) ipsec – fix IKEv1 tunnels failing to establish when the commit bit is set;
*) ipsec – improve stability;
*) ipv6 – fix a failure when releasing DHCPv6 prefix delegation pools;
*) l3hw – improve stability of L3 hardware offload when using IPv4-mapped IPv6 addresses;
*) leds – fix missing LED triggers when an R11e card is installed;
*) lte – do not force reconfiguration on roaming network when roaming is disabled;
*) lte – fix multi-APN connections not passing traffic on AT modems;
*) lte – fix multi-APN data connections not working on R11l-LTE7 and R11e-LTE6 modems;
*) lte – improve system stability when using Quectel EP06-E MBIM modem;
*) lte – improve system stability with eSIM-capable MBIM modems;
*) lte – use also the network reported ipv6 MTU on MBIM interfaces when "auto" mtu option used;
*) netinstall – fix adding and exporting server comments;
*) poe-out – fixed poe fault led behavior;
*) ppp – improve stability;
*) ptp – add manual configuration of PTP message intervals and per-port enabling and disabling;
*) ptp – fix PTP offset instability under heavy background multicast traffic;
*) ptp – fix PTP timestamps showing the wrong time on CRS510;
*) sfp – fix QSFP28 optical modules failing to establish a link on CCR2216 and CRS520;
*) sfp – improve QSFP-DD breakout link establishing to NVIDIA DGX Spark and other devices;
*) sniffer – show packet timestamps with nanosecond precision in WinBox;
*) ssh – add a connection id to SSH log entries;
*) ssh – warn users when weak RSA key is being used;
*) store – fix stored scripts and configuration entries larger than 16 KB (introduced in v7.25beta3);
*) system – improve device-mode flagged configuration detection;
*) system – improve stability;
*) system – show health settings and overtemp options based on device capabilities;
*) webfig – improve stability;
*) wifi – fix access point instability on A42 and E62 devices;
*) wifi – fix CAPsMAN failing when mangle marking is used with encrypted data channels;
*) wifi – fix traffic processing on CAPsMAN after an interface is disabled;
*) wifi – update radio regulatory information;
*) wifi-mediatek – fix 4.9 GHz band operation on the A42;
*) wifi-mediatek – fix the 5 GHz access point failing to start after reconfiguration on the A42;
*) wifi-qcom – improve IP multicast delivery to wireless clients;
*) winbox – fix the channel.reselect-interval range field in CAPsMAN;
*) winbox – fix the signal indication graphs for ppp-out interfaces;
*) www – improve stability;

View changelogs