Homelab with repairs

Hellow fellow homelabbers😎

Since i built my first homelab a couple of months ago a lot of stuff has happened. I had nodes come and go and now I have a surplus of random hardware parts.

The rack:

HP 2530-24G (Yggdrasil) switch that acts as a central switch for all my vlans in the rack and the appartment.

Cisco 5512-X (Heimdall) with OpnSense is getting firsthand WAN from the fiberbox, then sending the data after passing through firewall-rules to the switch.

Raspberry pi 4 (Loki) runs traefik and pi-hole which I also use as a DNS.

Node 1: Aurora. Ryzen 3 3100, 24gb DDR4, appr 4,5Tb storage. Runs in a proxmox cluster and have a leader-role.

Node 2: oden. Dell Poweredge R210-II, Xeon-E31270, 16gb DDR3, only one 128gb ssd, mostly small services.

Node 3: Bifrost. HP proliant DL380 G7. 2x Xeon-E5620, 55gb DDR3 ECC, several disks with appr 2,5Tb storage. Heavier workloads such as gitlab and Jellyfin.

Node 4: unnamed not in service. HP proliant DL360 G8, only one cpu, unsure of exact model, 48gb ram. I bought both HP servers cheap because they were broken. This one has 2 faulty fans and I have new fans on the way.

The cpu socket on the picture is from the Bifrost node. That is dry coolingpaste that someone didn't notice and the pins were bent. Luckily I managed to bend them back and get the node up and running 🙂